|
ZTE
Unit 1: Fundamentals of cellular Communication & CDMA Standard.
Unit 2: CDMA BSS System.
Test(1)
Unit 3: Wireless Data and Signaling System .
Unit 4: CDMA MSS System.
Test(2)
Duration : 3 Weeks
ZTE CDMA 2000 يوجد معمل مجهز بالكامل بأجهزة
|
Unit 1
Fundamentals of Cellular Communication and CDMA networks (4 days)
Objectives:
This course has been designed specifically to cover the needs and essentials for CDMA networks. This course provides in-depth coverage of the CDMA radio link used in Cellular networks. Upon completion, you will be able to explain the principles of CDMA technology, including the concepts of direct sequence spreading, processing gain, the use of PN sequences and orthogonal Walsh codes, RAKE receivers, and quadrature modulation. You also will be able to identify and explain the various stages of signal processing, from speech coding through modulation, used in both uplink and downlink directions. In addition, you will also be able to explain how CDMA RF carrier channels are deployed in both Cellular and PCS frequency bands, and list the various types of logical channels used to carry user information and set up and control calls.
Topics:
Principles of Multiple Access Technologies.
Principles of Direct Sequence CDMA
Transmission and recovery of CDMA signals
The RAKE receiver
Speech processing, channel coding, interleaving, encryption and scrambling
Use of PN long codes, PN short codes, and Walsh functions
Use of quadrature spreading and QPSK modulation
Fundamental channels for telecommunications traffic and control
Reverse channels for telecommunications traffic and control
CDMA Key technology
Power control Algorithm
Handoff Strategies
|
|
Unit 2
CDMA BSS System (4days)
Objectives:
This unit has been designed specifically to cover the practical part as well as the theoretical part, upon completion; you will be Familiar with all ZTE’s BSS CDMA product series, knowing the functions of each of them, so you will be able to understand the total CDMA architecture.
Topics:
BSS system architecture
ZTE's Base Station Controller (BSC) Architecture.
ZTE's Base Transceiver Station (BTS) Architecture.
Air Interface system architecture
System connections and boards functions.
System interconnection and compatibility.
Software management and installation
Practical implementation and administration
Exam for Units 1 & 2.
|
|
Unit 3
Wireless Data and Signaling System (3 days)
Objectives:
Upon completion of this unit you will be familiar with the wireless data transmission over CDMA cellular networks including wireless IP and radio link protocol concepts and procedures. In addition you will get an overview of the basics of the signaling system and all of its components and application for the CDMA switching system.
Topics:
PDSN system architecture
ZTE's Packet Data Switching Subsystem (PDSS) Architecture.
Wireless data Interface to wired data networks
System connections and boards functions.
System interconnection and compatibility.
Signaling System components
SS7 for cellular networks
|
|
Unit 4
CDMA MSS System (4 days)
Objectives:
Upon completion, students will be able to Administrate, Operate and Maintain the whole CDMA 2000 1X MSS system starting from the MSC, HLR, VLR, and AUC. Knowing the function of each board, and the total procedure for the call SETUP as well as the management of the traffic (voice or data) flow and signaling system. In addition, this unit has been designed specifically to cover the practical part as well as the theoretical part, upon completion; you will be Familiar with all ZTE’s MSS CDMA product series.
Topics:
MSS system architecture
ZTE's Mobile Switching Center (MSC) Architecture.
ZTE's Home Location Register (HLR) Architecture.
VLR/AUC system architecture
System connections and boards functions.
Installation and Management of MSC/VLR
Installation and Management of HLR/AUC
Practical implementation and administration
Exam for Units 3 & 4.
|
|
